Enzymatic synthesis of coconut oil based wax esters by immobilized lipase EQ3 and commercial lipozyme RMIM

BACKGROUND: Liquid wax esters are widely used in cosmetic as well as pharmaceutical and other industries. The demand of organic and natural products is increasing nowadays. Coconut oil contains benefit fatty acids and has been mainly used for oil-based and moisturizer products. Liquid wax esters from coconut oil and unsaturated fatty alcohol can be synthesized by enzymatic reaction; and it is interesting for using as an alternative natural ingredient in these industries. RESULTS: Optimal condition for coconut oil based wax ester synthesis by immobilized lipase EQ3 was 10 U of enzyme, temperature at 30°C and molar ratio of coconut oil to oleyl alcohol at 1:3 (mol/mol) (0.33X) dissolved in isooctane for 12 h, while for Lipozyme RM IM optimal condition was 10 U of enzyme, temperature at 45°C and oil/alcohol molar ratio at 1:3 (0.33X) dissolved in isooctane for 3 h. Percentage of wax esters synthesized by both lipases reached more than 88%. Both immobilized lipases catalyzed high yield of wax esters within the 2nd batch; after that, the immobilized lipases showed reduced activity and synthesized b60% of wax esters from the 3rd to 5th batch. The main composition of wax esters was ~48% oleyl laurate with 10% degradation at ~250°C. CONCLUSIONS: The liquid wax ester synthesis by commercial Lipozyme RM IM had higher effect than immobilized lipase EQ3, but both catalysts were stable within 2 batches in the optimum condition. The characteristic properties of wax esters showed potential for use as components in cosmetics and skin care products.

Síntesis y regulación de compuestos del aroma y el sabor derivados de la levadura en la cerveza: ásteres / Synthesis and regulation of flavor compounds derived from brewing yeast: Esters

Las levaduras, durante el proceso de elaboración de cerveza, producen más de 500 compuestos químicos; estos pueden impactar tanto negativa como positivamente en las características organolépticas de la cerveza. En los últimos años, y en particular gracias al avance de la biología molecular y la genómica, se han logrado progresos notables en el conocimiento de las bases moleculares y celulares de la síntesis y regulación de muchos de estos compuestos que inciden en lo que se denomina flavor (aroma y sabor) de la cerveza. Este artículo está enfocado en los ésteres responsables del aroma y el sabor floral y frutado de la cerveza. La formación de estos ésteres depende de diversas enzimas y de factores como la concentración de nutrientes presente en el mosto, la cantidad de oxígeno y dióxido de carbono disuelto, la temperatura de fermentación y, principalmente, la genética de la levadura utilizada. En esta revisión se brinda información de cómo se originan los ésteres y cómo los diferentes parámetros fermentativos impactan en las concentraciones finales de estos compuestos y en la calidad del producto terminado.

During brewing process yeast produce more than 500 chemical compounds that can negatively and positively impact beer at the organoleptic level. In recent years, and particularly thanks to the advancement of molecular biology and genomics, there has been considerable progress in our understanding about the molecular and cellular basis of the synthesis and regulation of many of these flavor compounds. This article focuses on esters, responsible for the floral and fruity beer flavor. Its formation depends on various enzymes and factors such as the concentration of wort nutrients, the amount of dissolved oxygen and carbon dioxide, fermentation temperature and mainly the genetics of the yeast used. We provide information about how the esters originate and how is the impact of different fermentative parameters on the final concentrations of these compounds and the quality of the end product.

Hydrolytic efficiency and isomerization during de-esterification of natural astaxanthin esters by saponification and enzymolysis

Background: Astaxanthin from natural sources is typically esterified with fatty acids; hence, it must be hydrolyzed to remove esters before identification and quantification by conventional HPLC. Alkaline-catalyzed saponification and enzyme-catalyzed enzymolysis are the most commonly used de-esterification methods. However, information on the efficiency and isomerization during de-esterification of natural astaxanthin esters by these two methods remains scarce. Therefore, we conducted two HPLC-based experiments to determine which method is better for hydrolyzing astaxanthin esters. Results: To assess the effect of enzymolysis (0.67 U/mL cholesterol esterase, at 37°C) and saponification (0.021 M NaOH, at 5°C) conditions on free astaxanthin recovery and destruction or structural transformation of astaxanthin, we varied the total treatment time across a range of 195 min. The results showed that enzymolysis and saponification were complete in 60 min and 90 min, respectively. After complete hydrolysis, the maximum free astaxanthin recovery obtained by enzymolysis was 42.6% more than that obtained by saponification. The identification of by-products, semi-astacene and astacene, during the process of saponification also indicated that a more severe degradation of astaxanthin occurred during saponification. Moreover, the composition of astaxanthin isomers during saponification was similar to that of the isomers during enzymolysis between 30 min and 75 min (all-trans:9-cis:13-cis = 21:3:1, approximately) but dramatically changed after 90 min, whereas the composition in the enzymolysis treatment remained relatively stable throughout. Conclusion: Compared with saponification, enzymolysis with cholesterol esterase was recommended as a more accurate method for de-esterification of natural astaxanthin esters for further qualitative and quantitative HPLC analysis.

Complete genome sequence of a phthalic acid esters degrading Mycobacterium sp. YC-RL4

ABSTRACT Mycobacterium sp. YC-RL4 is capable of utilizing a broad range of phthalic acid esters (PAEs) as sole source of carbon and energy for growth. The preliminary studies demonstrated its high degrading efficiency and good performance during the bioprocess with environmental samples. Here, we present the complete genome of Mycobacterium sp. YC-RL4, which consists of one circular chromosome (5,801,417 bp) and one plasmid (252,568 bp). The genomic analysis and gene annotation were performed and many potential genes responsible for the biodegradation of PAEs were identified from the genome. These results may advance the investigation of bioremediation of PAEs-contaminated environments by strain YC-RL4.

Statistical and evolutionary optimization for enhanced production of an anti-leukemic enzyme, L-asparaginase, in a protease-deficient Bacillus aryabhattai ITBHU02 isolated from the soil contaminated with hospital waste.

Over the past few decades, L-asparaginase has emerged as an excellent anti-neoplastic agent. In present study, a new strain ITBHU02, isolated from soil site near degrading hospital waste, was investigated for the production of extracellular L-asparaginase. Further, it was renamed as Bacillus aryabhattai ITBHU02 based on its phenotypical features, biochemical characteristics, fatty acid methyl ester (FAME) profile and phylogenetic similarity of 16S rDNA sequences. The strain was found protease-deficient and its optimal growth occurred at 37 °C and pH 7.5. The strain was capable of producing enzyme L-asparaginase with maximum specific activity of 3.02±0.3 Umg-1 protein, when grown in un-optimized medium composition and physical parameters. In order to improve the production of L-asparaginase by the isolate, response surface methodology (RSM) and genetic algorithm (GA) based techniques were implemented. The data achieved through the statistical design matrix were used for regression analysis and analysis of variance studies. Furthermore, GA was implemented utilizing polynomial regression equation as a fitness function. Maximum average L-asparaginase productivity of 6.35 Umg-1 was found at GA optimized concentrations of 4.07, 0.82, 4.91, and 5.2 gL‑1 for KH2PO4, MgSO4.7H2O, L-asparagine, and glucose respectively. The GA optimized yield of the enzyme was 7.8% higher in comparison to the yield obtained through RSM based optimization.

High performance enzymatic synthesis of oleyl oleate using immobilised lipase from Candida antartica

High performance enzymatic synthesis of oleyl oleate, a liquid wax ester was carried out by lipase-catalysed esterification of oleic acid and oleyl alcohol. Various reaction parameters were optimised to obtain high yield of oleyl oleate. The optimum condition to produce oleyl oleate was reaction time; 5 min, organic solvents of log P is greater than or equal to 3.5, temperature; 40-50 ºC, amount of enzyme; 0.2-0.4 g and molar ratio of oleyl alcohol to oleic acid; 2:1. The operational stability of enzyme was maintained at >90 percent yield up to 9 cycles. Analysis of the yield of the product showed that at optimum conditions, >95 percent liquid wax esters were produced.